topic Re: BT versatility serial connection timeout in Archive

BT versatility serial connection timeout

Leviathan — Thu, 22 Nov 2012 00:46:13 GMT

I have a BT Versatilty system installed.

Have gotbasic sewtiupok and have purchased serial cable and serial to usb adapter.

I have sorted out the driver for the pc as initially the Win7 driver was not liking the USB cable, now thjough can connect via Wizard and goes green when trying.

After a few seconds it comes back with "PABX connection lost. Timeout whilst waiting for acknowledgement"

Presum as can get connection that data is being sent but none coming back? I have setr the baud rate to 4800 via programming position on master phone and made sure virtual port settings on comm 3 (the one being used) all match.

At a bit of a loss really to know how to proceed.....anyone help?

Cheers rob

Re: BT versatility serial connection timeout

Davel — Thu, 22 Nov 2012 19:39:13 GMT

It could be down to which com port is allocated to which usb outlet. Either try changing the com port in the Versatility software or try all of your usb sockets.

dave

Re: BT versatility serial connection timeout

wernstrom — Wed, 28 Nov 2012 09:19:39 GMT

I tried a few different USB<>Serial adapters and couldn't get any to work reliably with Win7, as far as I can tell, it's not a problem with the phone system, as they wouldn't work with an old serila PalmPilot either.

My solution was to just get hold of an old Dell laptop with an actual serial port - worked first time.

Re: BT versatility serial connection timeout

Davel — Wed, 28 Nov 2012 20:17:43 GMT

I use a Bandridge USB -serial converter which works fine.