topic Re: BT Home Hub DNS Issues with cctv system in Archive

BT Home Hub DNS Issues with cctv system

mikecctv — Mon, 20 Apr 2009 18:32:25 GMT

Hi Everyone,
I have a CCTV security System connected to bt home hub (white w/phone) ,I have set up a dns address
@ dyndns.com,the problem is the dynamic address is not being updated on router so i cant log in to view
cctv,the pc is off most of the time,but apparently this router has an in built updater,does this need to be activated/enabled??
any help would be appreciated...I have set up port forwarding etc. and i have accessed when originally set up( before ip address changed!!)

Re: BT Home Hub DNS Issues with cctv system

a-hill — Wed, 22 Apr 2009 07:28:31 GMT

mikecctv,

yes you will need to enable dynamic DNS on the hub. Go to Advanced, then click Continue to advanced:. On the extended menu at the left under configuration click Dynamic DNS at the bottom and you'll be able to enter your DynDns details in there.

Re: BT Home Hub DNS Issues with cctv system

alig1942 — Fri, 07 Oct 2011 22:09:22 GMT

Can you please advise how to configure dynamic DNS on homehub 3.

Your assistance would be much appreciated.

Regards

Alan

Re: BT Home Hub DNS Issues with cctv system

JohnE — Thu, 13 Oct 2011 10:42:03 GMT

You may find the help you require over at the Residential forums:

BTCare Community Forums

It's probably the best place to get advice about setting this up on the Home Hub.