BT2700HGV VOIP dial plan

gc1 — Sat, 02 Jul 2011 20:23:08 GMT

Is there any way to change the VOIP dial plan on the BT2700HGV router running software version 5.29.117.6 ?

The default dial plan:

[2-9]XXXXXX|0[12]XXXXXXXX.T|0[12]XXXXXXXXX|0[346]|07XXXXXXXXX.T|08XXXXXX.T|08XXXXXXXXX|
09XXXXXXXXX|09XXXXXXXX.T|00X.T|1XX.T|100|123|1247|142XX|149X|141XXXXXXXXXXX|153|155|1571|
180XX|192|195|*XX*|*XX#|#XX*|#XX#|*#XX*|*#XX#|*XXX*|*XXX#|#XXX*|#XXX#|*#XXX*|*#XXX#|
999|112|1470XXXXXXXXXXX|1471|1474|1475|**[5-9]|**[1-4]X|0500XXXXXX|05XXXXXXXXX|05XXXXXXXXX.T

is fine for the BT VOIP service but if you want to configure the second voice port to use a foreign VOIP service (e.g. a U.S.A one) it doesn't work so well as some numbers cannot be dialled. This makes it very hard to make SIP IP to IP calls to VOIP users in other countries who have a SIP telephone address.

Alternatively is is possible to disable use of the dial plan on one port so that the number sent is exactly as dialled ?

Re: BT2700HGV VOIP dial plan

SeanC — Wed, 06 Jul 2011 11:18:49 GMT

Hi GC1

As far as I can tell there is no way to change the dial plan or disable it on the 2700 lastest firmware.

The Version of FW you are currently using is an older version so maybe possible but again I can't advised, removing it would stop our voip service from working.

Regards

Sean

topic BT2700HGV VOIP dial plan in Archive

BT2700HGV VOIP dial plan

Re: BT2700HGV VOIP dial plan