BT Business Hub 3 & cisco 526 wireless controller

Tarkipoo — Wed, 16 Dec 2015 12:07:37 GMT

Hi,

does anyone know why

Wireless clients cannot pick up an IP address from the hub when connected to our segregated 'guest' WLAN through the controller/access points.

If the client is configured with a static address things work fine.
If the wireless controller distributes IP addresses clients have connectivity

However, there *appears* to be a client limit set somewhere. Specifically, a few days ago, we had 60+ wireless clients connected at which point the service stoped providing service to all clients. If there are a handful of connections everything works fine.

Is this something that is set on the router or (less likely) the line. If so is it something I can easily change or do I need to replace it with 3rd party product?

Steve

Re: BT Business Hub 3 & cisco 526 wireless controller

markp — Wed, 16 Dec 2015 14:12:58 GMT

Hi Tarkipoo,

Do you have the Hub 3 suppliying the IP's via DHCP for all the connections or is the Cico 536 supplying them on a different DHCP range for your guests/clients?

Mark

topic Re: BT Business Hub 3 & cisco 526 wireless controller in Archive

BT Business Hub 3 & cisco 526 wireless controller

Re: BT Business Hub 3 & cisco 526 wireless controller