topic Re: BT Business HUB 2701HG-C in Archive

BT Business HUB 2701HG-C

bazru — Mon, 14 May 2012 11:09:30 GMT

Hello!

After an unsuccessful upgrading I cannot see options page (192.168.1.254).

It does not open. Thus HUB it is connected to the computer normally on WIFI or LAN (IP 192.168.1.66)

How I can restore old firmware (ver: v6.3.9.41-plus.tm) ?

Re: BT Business HUB 2701HG-C

MHC — Mon, 14 May 2012 11:41:16 GMT

As you "upgraded" to non-BT firmware, you took that risk your self.

You re-flashed the firmeware to Qwest QT04-6.1.5.48.2 and now expect to do the impossible and return it to BT version 6.3.9.41-plus.

You now have a very expensive BRICK!

Re: BT Business HUB 2701HG-C

kimura — Mon, 14 May 2012 12:12:44 GMT

This is interesting. The IP shouldn't be changed on the upgrade. Can you at least ping 192.168.1.254? Also check your notebook, maybe it has a static assigned on a different subnet.

Trying other browsers might help too.

Re: BT Business HUB 2701HG-C

MHC — Mon, 14 May 2012 12:30:08 GMT

@kimura wrote:
This is interesting. The IP shouldn't be changed on the upgrade.

Why not?

The ISP or manufacturer can specify any of the public IP ranges for the default - 10.xxx.xxx.xxx or 172.16.xxx.xxx or 192.168.xxx.xxxand define whatever they wish within those ranges to be the router default.

Re: BT Business HUB 2701HG-C

bazru — Mon, 14 May 2012 13:26:56 GMT

Ping on 192.168.1.254 passes successfully

But the page of options does not open.

I notebook has dynamic IP DHCP

The modem gives out to it following IP - 192.168.1.66

Re: BT Business HUB 2701HG-C

bazru — Mon, 14 May 2012 13:31:00 GMT

Re: BT Business HUB 2701HG-C

bazru — Mon, 14 May 2012 13:30:10 GMT

You now have a very expensive BRICK!

There is no decision of this problem?

Unless there is no program of restoration of a factory firmware?