05-11-2007 01:46 AM - edited 05-11-2007 01:48 AM
Message Edited by swegger on 11-05-2007 01:48 AM
06-11-2007 03:06 PM
I can provide the detail necessary to clear the device list, before you clear the list I wonder whether you would mind posting some detail on the devices, I am interested to see if the all 3 devices are using the same MAC address, or these devices are list as 3 separate hosts.
You can collect this detail by following process below:
Select the following link: http://192.168.1.254/xslt?PAGE=C01&THISPAGE=&NEXTP
Can you then select device details for each of the devices listed as "detective" which should provide some detail on each device i.e. mac address etc, please note this in non sensitive data and there should be no security impact of listing the detail on this POST.
In order to clear the device list to get rid of these "detective" clients, you can follow the process below:
Click on following link to go to reset page: http://192.168.1.254/xslt?PAGE=J21&THISPAGE=J10&NE
Now select "Clear Local Network"
All devices should now be cleared on you gateway, please let me know if you have any issues.
25-06-2008 10:22 PM
I have the same issue, I have 3 devices connected to my network, all called detective. The only way to clear them is to clear my whole network which is not the best solution. I am using a 2700HGV modem.
mac addresses below:-
detective e9:eb:b3:a6:db:3c 126.96.36.199 detective 4d:c8:43:bb:8b:a6 188.8.131.52 detective 45:3b:13:0d:89:0a 192.168.1.64
All connection types are unknown.
Is there any way to stop this without clearing my network?
08-11-2010 03:50 PM
I had the same MAC addresses after using the MS Wizard to create a first server on my network.
detective e9:eb:b3:a6:db:3c 192.168.1.102 Device Details
detective 4d:c8:43:bb:8b:a6 192.168.1.103 Device Details
detective 45:3b:13:0d:89:0a 192.168.1.104 Device Details
The three devices above appeared on my network and were not reachable. More information pointed me to http://support.microsoft.com/kb/945948 which attempts to explain why these are created without admitting the actual mac addresses. I had to reset my 2wire router computer list to remove these devices. The information on how to remove computers from the list is in the Settings,Diagnostics,Reset menu of my router.
Hopefully this saves someone else time in the future.....