After 9 months of poor wifi coverage I invested in a Linksys Velop WiFi Mesh system. To avoid any issues I turned the Business Smart Hub in to Bridge Mode and used the Velop as the router.
When I try to access the hub it will not connect. I've tied connecting a PC directly to the hub but as there is no DHCP active on the hub it won't allocate an IP address. However, I'd still have expected the Hub to appear on the network.
The Velop Settings are:-
Router IP - 192.168.1.1
Subnet Mask - 255.255.255.0
DHCP - 192.1.168.10
IP Address Range - 192.168.1.10 to 192.168.1.249
ANy suggestions would be appreciated.
