Hi,
I am on an old 20C exchange with no hope of getting an upgrade (welcome to "digital Britain"). I am running G.992.1 (ADSL) Annex A
My atm connection is pretty good and I get near to the 8MB DOWNSTREAM. However I am only getting 448k UPSTREAM. This is because of the way BT have configured their equipment. They have set the profile to only allow 448K 😞
Here is the output from a SNR RESET today:
283661: Dec 18 13:58:55.510 PCTime: (ATM0): VPI/VCI: 0/38, peak 448, Avg 448, mbs 0
283662: Dec 18 13:58:55.510 PCTime: Changing vc 0/38 vc-state to ATM_VC_ESTABLISHING_VC
283663: Dec 18 13:58:55.510 PCTime: ATM0: atmsar_1a_setup_vc, atm_vc_handle = 0x8711DDA4
283664: Dec 18 13:58:55.510 PCTime: ATM0 atmsar_vc_setup: vcd 1
283665: Dec 18 13:58:55.510 PCTime: Fill up paramaters for PVC 0/38[1] - Request for CoS 5 PCR 448 SCR 448 MCR 0 Available 448
283666: Dec 18 13:58:55.510 PCTime: Scheduler parameters for 0/38. Type VBR-NRT. PCR 448, SCR 448, MBS 0
283667: Dec 18 13:58:55.510 PCTime: Total scheduled bandwidth after configuringPVC 0/38 will be 448
And sure enough here it is:
DS Channel1 DS Channel0 US Channel1 US Channel0
Speed (kbps): 0 8128 0 448
How do I get someone to change the profile to allow me to try for the full 832k??
I can do this with Plusnet or Zen or anyone else, so why can't I do it with BT? BT is the only equipment in my exchange so Plusnet will be just making the change to the config.
How do I do this with BT or do I have to move my broadband somewhere else?
Thanks
