cancel
Showing results for 
Search instead for 
Did you mean: 

Smart Hub in Bridge Mode

vagulone
Member

After 9 months of poor wifi coverage I invested in a Linksys Velop WiFi Mesh system. To avoid any issues I turned the Business Smart Hub in to Bridge Mode and used the Velop as the router.

 

When I try to access the hub it will not connect. I've tied connecting a PC directly to the hub but as there is no DHCP active on the hub it won't allocate an IP address. However, I'd still have expected the Hub to appear on the network.

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions

dial1899
Member

Nope, not in bridge mode.  I've just tried that.  Assign an IP address for the hub in the router behind the 'bridge' and route internet traffic to it.

View solution in original post

1 REPLY 1

dial1899
Member

Nope, not in bridge mode.  I've just tried that.  Assign an IP address for the hub in the router behind the 'bridge' and route internet traffic to it.