Panasonic ip Camera set up using one of the 5 bt business static ip address

[mikethickens]

Panasonic ip Camera set up using one of the 5 bt business static ip address

Hey

First post new bt infinity 

We have a couple of panosonic ip camera the older BB-HCM331

weve had them set up for years did it myself on the old static ip address worked flawlessly.

I cant seem to work out how to set them up giving them one of the 5 ip address we have

Could anyone help i havell all the original discs etc.

I think im right in saying i dont need port forwarding if each one is assigned its own ip address ?

Cheers

[Burkem5]

Hi Mike

You will still need port forwarding for this to work,

I can help you do this in 3 steps

STEP 1 - set up the IPs
First off take the [default gateway] and the [subnet mask]

Open a new tab and go to 192.168.1.254 ( if this is a BT router)
then click on settings > static IP
enter the info that this asks and then click apply

this will set up the static IP pool

STEP 2 - apply the IP

then go to advanced settings
then go to business network click on your camera and choose whichever IP you would like

STEP 3 - open the port

then its simply a case of opening the ports for this

click on port forwarding set up the ports you want - example for port 80 its from 80 to 80

then go back to business network and apply the port forwarding to your camera

Thanks